Proserv Pneu Hydro Valves and Accessories

HIMax Nonstop safety for everyone who thinks ahead
9 November 2018
Debit Deltafluid
9 November 2018
View Fullscreen
Proserv Pneu Hydro Valves and Accessories
Technical Specification
316 stainless steel tools
Model Number Description
001-ZOZ
Pointed prying tool – 462688-1
Piercing tool – 462688-2
Tweezers – 462688-3
Jogging/Prying tool – 462688-4
Prodding/removal tool – 462688-5
Vinyl pouch – 462688-6
Instruction sheet – 462688-7
This kit of specifically designed tools for installing and extracting O-rings consists of:
• Pointed prying tool
• Piercing tool
• Tweezers
• Jogging/Prying tool
• Prodding/Removal tool
• Prodding tool
• Vinyl pouch
• Instruction sheet
The items are invaluable to engineers, technicians and assembly personnel working on
pneumatic, hydraulic and other fluid devices. They are fabricated from corrosion resistant
materials for compatibility with most fluids and may be used in clean-room applications.
Tools are packaged in an attractive plastic pouch with pockets to separate the various
items.
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro O-ring Tool Kit
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
Technical Specification
Can be customized to suit material requirements.
Model Numbers
Inlet Outlet
Dimensions (in)
Cv
Operating Temperature
Ranges
Operating Pressure
Ranges
Buna-N Viton L Hex
PH301F4Q PH301F4Q-V 0.25 NPTF 0.25 NPTF 2.28 0.75 0.55
Buna-N Seals Viton Seals
Maximum 10,000 psi (689
bar)
PH301M4Q PH301M4Q-V 0.25 NPTM O.25 NPTM 2.34 0.75 0.55
-40 to 250 o F
(-40 to 121 o C)
-20 to 400 o F
(-29 to 232 o C)
PH301M4F4Q PH301M4F4Q-V 0.25 NPTM 0.25 NPTF 2.28 0.75 0.55
PH301F6Q PH301F6Q-V 0.38 NPTF 0.38 NPTF 3.13 1.06 1.3
PH301M8Q PH301M8Q-V 0.5 NPTM 0.5 NPTM 3.63 1.06 1.3
Proserv’s Pneu-Hydro bar stock check valves seal bubble tight, even without back
pressure. When open, they provide a smooth flow-path with minimum resistance.
The poppet is spring loaded for positive operation regardless of orientation.
Back pressure and spring loads are carried by a metal stop rather than the soft
o-ring seal. This ensures long seal life and minimum maintenance.
These check valves are constructed of 316 stainless steel for strength and
corrosion resistance and meet the requirements of NACE MRO175. Because of
their bar stock design, the valves can be easily made. Buna-N or Viton seals are
available from stock and other O-ring materials can be provided.
Features & Benefits
• Wide series of available pressure ranges
• Smooth, chatter-free performance
• Reliable and repeatable cracking and reseating pressures
• 316 stainless steel construction (Also available in Hastelloy, Duplex Stain-
less Steel, Inconel 625, Monel 400)
• Seal material selections are available for compatibility with virtually any
fluid chemistry
• Standard seal materials are Buna-N seals and Viton seals
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Check Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu-Hydro Valves are manufactured at an ISO 9001 facility.
Repair Kit Part Numbers are included on page 2 of this spec sheet.
Pneu-Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
Note: All models are designed for 5 psid cracking pressure. To order valves with the optional
pressures shown above, add the indicated suffix number to the basic model number.
Crack pressure suffix number
2 psid -1
10 psid -2
25 psid -3
Example of Part Numbers:
PH301F4Q Standard, Buna-N O-Ring, 5 psid cracking pressure
PH301F4Q-V Viton O-Ring, 5 psid cracking pressure
PH301F4Q-3 Buna-N O-Ring, 25 psid cracking pressure
PH301F4Q-3V Viton O-Ring, 25 psid cracking pressure
OUTLET
INLET
HEX
LENGTH
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Check Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Technical Specification
Standard Repair Kits
Repair Kits for Valves with Buna-N Seals 1/4” NPT
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range
PH613396 PH301F4Q, PH301M4Q, PH301M4F4Q 5 psi
PH613396-2 PH301F4Q-1, PH301M4Q-1, PH301M4F4Q-1 2 psi
PH613396-10 PH301F4Q-2, PH301M4Q-2, PH301M4F4Q-2 10 psi
PH613396-25 PH301F4Q-3, PH301M4Q-3, PH301M4F4Q-3 25 psi
Repair Kits for Valves with Viton Seals 1/4” NPT
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range
PH613396-V PH301F4Q-V, PH301M4Q-V, PH301M4F4Q-V 5 psi
PH613396-2V PH301F4Q-1V, PH301M4Q-1V, PH301M4F4Q-1V 2 psi
PH613396-10V PH301F4Q-2V, PH301M4Q-2V, PH301M4F4Q-2V 10 psi
PH613396-25V PH301F4Q-3V, PH301M4Q-3V, PH301M4F4Q-3V 25 psi
Repair Kits for Valves with Buna-N Seals 3/8” & 1/2” NPT
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range
PH613581 PH301F6Q, PH301F6Q-1, PH301M8Q, PH301M8Q-1 2 & 5 psi
PH6133581-10 PH301F6Q-2, PH301M8Q-2 10 psi
PH613581-25 PH301F6Q-3, PH301M8Q-3 25 psi
Repair Kits for Valves with Viton Seals 3/8” & 1/2” NPT
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range
PH613581 -V PH301F6Q-V, PH301F6Q-1V, PH301M8Q-V, PH301M8Q-1V 2 & 5 psi
PH613581-10V PH301F6Q-2V, PH301M8Q-2V 10 psi
PH613581-25V PH301F6Q-3V, PH301M8Q-3V 25 psi
Proserv’s Pneu Hydro excess-flow check valve has been designed to contain
pressurized fluids in the event of catastrophic downstream failure.
Its poppet is normally held open by a spring and flow is permitted in both
directions through the valve. In the event of down-stream failure
(line-rupture, seal-failure and gauge over-pressurization) the resultant pres-
sure drop across the poppet orifice creates an imbalance which closes the
poppet. The poppet remains closed, preventing further escape of fluid until
the system is repaired. Removal of supply pressure for system maintenance
allows the spring to reset the poppet to its open position.
Features & Benefits
• Flow is normally permitted in both directions through the valve
• In the event of a down-stream failure causing an imbalance in pressure,
the poppet will close preventing escape of fluid until system repair
• The spring will reset the poppet to its open position after the removal of
supply pressure for system maintenance
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Excess-Flow Check Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
HEX
LENGTH
OUTLET
INLET
Technical Specification
Can be customized to suit material requirements.
Model
Number
Viton
Operating Temperature Ranges Operating Pressure Ranges
PH213677-V
Viton temperature range -20 to 400 o F (-29 to 204 o C) Service – Standard, H2S-CO2
Flow capacity Cv .45 Design specification – NACE MR-01-75
Flow Valve shuts pneumatically at 1.0psi Fluid – Liquid or gas
Internal-External Leakage Zero Operating Pressure Working Pressure Proof Pressure Burst Pressure
Weight 0.375 lb (0.17 kg)
50psi
(3.45 bar)
7,500psi
(517 bar)
10,000psi
(689 bar)
15,000psi
(1,034 bar)
Technical Specification
Can be customised to suit material requirements.
Section
Maximum
pressure
Model Numbers Pressure range
Terminal digits
High pilot digits 1 & 2 Low pilot digits 3 & 4
A
1500 psi PH433741 5 – 50 psi (.3 – 3.4 bar)* 01 01
1500 psi PH433742 30 – 115 psi (2.0 – 7.9 bar)* 02 02
10,000 psi PH433744 100 – 1,000 psi (6.9 – 68.9 bar) 03 03
10,000 psi PH433745 500 – 1,500 psi (34.4 – 103.4 bar) 04 04
10,000 psi PH433746 1,500 – 3,500 psi (103.4 – 241.3 bar) 05 05
B
10,000 psi PH433743 1,000 – 5,000 psi (68.9 – 344.7 bar) 06 06
10,000 psi PH433730 3000 – 6000 psi (206.8 – 413.7 bar) 07 07
10,000 psi PH433747 5,000 – 10,000 psi (344.7 – 689.5 bar) 08 08
Proserv’s Pneu-Hydro High-Low Manifold Pilots Assembly (HL-2) include
two HL-2 pilots mounted on a manifold to produce a high-low (PSHL)
assembly for pressures to 10,000 psi (689.5 bar). Any two ranges can be
used with consideration of the maximum working pressure for the low pilot.
The pilots are block-and-bleed valve devices. One is set to monitor low
pressure and the other high pressure. A common pressure is sensed
through the manifold block. If either the high or low limit is reached, the
assembly blocks and bleeds control pressure to provide failsafe shutdown
of the system.
Features & Benefits
• Wide series of available pressure ranges
• Smooth, chatter-free performance
• Reliable and repeatable cracking and reseating pressures
• 316 stainless steel construction (also available in
hastelloy, duplex stainless steel, inconel 625, monel 400)
• Seal material selections are available for
compatibility with virtually any fluid chemistry
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro High-Low Manifold Pilots Assembly (HL-2)
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Old arctic commodity numbers were 876-71.
Pneu Hydro Valves are not European pressure directive, ATEX or CE certified.
HIGH LOW
LOW VENT
OUT
HIGH
VENT
IN
TEST PORT
SENSE PORT
Technical Specification
Can be customized to suit material requirements.
Model Numbers
Standard/H 2 S-CO 2
Model Numbers
Arctic Service
Operating Temperature Ranges Pressure Range
PH433741 PH433741-A
-20 0 to 400 0 F (-28.9 0 to 204.4 0 C)
5 – 50 psi (.34 – 3.4 bar)
PH433742 PH433742-A 30 – 115 psi (2.1 – 7.9 bar)
PH433744 PH433744-A 100 – 1,000 psi (6.9 – 68.9 bar)
PH433745 PH433745-A 500 – 1,500 psi (34.5 – 103.4 bar)
PH433743 PH433743-A 1,000 – 5,000 psi (68.9 – 344.7 bar)
PH433746 PH433746-A 1,500 – 3,500 psi (103.4 – 241.3 bar)
PH433730 PH433730-A 3,000 – 6,000 psi (206.8 – 413.7 bar)
PH433747 PH433747-A 5,000 – 10,000 psi (344.7 – 689.5 bar)
Proserv’s Pneu-Hydro HL-2 High-Low Pressure Pilot Valves are designed to protect
equipment and installations against abnormal pressures. They are available in pres-
sure ranges up to 10,000 psi and can operate as a normally open block-and-bleed
device for sensing high or low pressure conditions dependent upon how the control
ports are connected. It is applicable for both pneumatic and hydraulic service.
These pilots are available in eight pressure ranges. In order to select the proper
range, consult the tables below. Specify both the operating pressure range and
complete product number when ordering. To use the pilot as a high pressure sensor,
connect the supply pressure line to the upper inlet, stamped N.O. To use the pilot as a
low pressure sensor, connect the supply pressure line to the lower inlet stamped N.C.
Features & Benefits
• Wide series of available pressure ranges
• Smooth, chatter-free performance
• Reliable and repeatable cracking and reseating pressures
• 316 stainless steel construction (Also available in Hastelloy, Duplex Stainless
Steel, Inconel 625, Monel 400)
• Seal material selections are available for compatibility with virtually any
fluid chemistry
• Repeatability of set point = 1% of full range max
• Dead Band = 10% of full range max
• Weight = Approx 2.8 lbs
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro HL-2 High-Low Piston “Stick” Pilot
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Old Arctic Commodity Numbers were 876-71.
Artic Service Repair Kit add “A” to the end of the kit number.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
Low Pressure Sense
Schematic
High Pressure Sense
Schematic
(NO)
EXHAUST
INLET
(NC)
(NC)
EXHAUST
INLET
(NO)
COM COM
8.8 MAX
NO
COM
NC
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro HL-2 High-Low Piston “Stick” Pilot
ingenious simplicity
info@proserv.com
www.proserv.com
Technical Specification
Standard Repair Kits
Repair Kits for Valves with Standard/H 2 S-CO 2
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613741 PH433741 5 – 50 psi (.34 – 3.4 bar) Yellow
PH613742 PH433742 30 – 115 psi (2.1 – 7.9 bar) Blue
PH613744 PH433744 100 – 1,000 psi (6.9 – 68.9 bar) Blue
PH613745 PH433745 500 – 1,500 psi (34.5 – 103.4 bar) Red
PH613743 PH433743 1,000 – 5,000 psi (68.9 – 344.7 bar) Blue
PH613746 PH433746 1,500 – 3,500 psi (103.4 – 241.3 bar) Blue
PH613730 PH433730 3,000 – 6,000 psi (206.8 – 413.7 bar) Red
PH613747 PH433747 5,000 – 10,000 psi (344.7 – 689.5 bar) Yellow
Repair Kits for Artic Valves
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613741-A PH433741-A 5 – 50 psi (.34 – 3.4 bar) Yellow
PH613742-A PH433742-A 30 – 115 psi (2.1 – 7.9 bar) Blue
PH613744-A PH433744-A 100 – 1,000 psi (6.9 – 68.9 bar) Blue
PH613745-A PH433745-A 500 – 1,500 psi (34.5 – 103.4 bar) Red
PH613743-A PH433743-A 1,000 – 5,000 psi (68.9 – 344.7 bar) Blue
PH613746-A PH433746-A 1,500 – 3,500 psi (103.4 – 241.3 bar) Blue
PH613730-A PH433730-A 3,000 – 6,000 psi (206.8 – 413.7 bar) Red
PH613747-A PH433747-A 5,000 – 10,000 psi (344.7 – 689.5 bar) Yellow
Technical Specification
Model
Number
Inlet Outlet
Dimensions (in)
Orifice Cv Operating Temperature Ranges Operating Pressure Ranges
L H SQ
PH206F4Q
0.25
NPT F
0.25
NPT F
1.81 2.38 0.89 0.125 0.26
-65 to 400 o F (-53 to 204 o C)
Maximum 6,000 psi (413.69 bar)
Maximum 10,000 psi (689 bar)
PH202M4F4Q
0.25
NPT M
0.25
NPT F
1.93 2.5 1 0.125 0.26
PH202F4Q
0.25
NPT F
0.25
NPT F
1.81 2.5 1 0.125 0.26
Proserv’s Pneu-Hydro hand valves offer design and operating features not typ-
ically found on valves of this pressure range. The Teflon stem packing is located
below the stem threads and pintle swivel. This helps prevent contamination and
lubrication washout by isolating this critical area from the process fluid. This,
combined with the very low operating torque (less than 10 lb-inches), provides a
precise ‘feel’ and adjustment sensitivity over the lifetime of the valve.
The valve stem is designed so that it cannot be inadvertently backed out of the
valve. The low profile makes this valve ideally suited for panel mounted or other
limited space applications.
Features & Benefits
• Self-aligning swivel pintles to minimize seat scoring
• Teflon stem seal and 316 stainless steel construction to provide maximum
compatibility with corrosive fluids
• Weight = approx .5 lbs
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Hand Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
LENGTH
SQ
HEIGHT (MAX)
Technical Specification
Can be customized to suit material requirements.
Model
Numbers
Description
Operating Temperature Ranges
Viton Seals
Cv
Maximum Operating
Pressure Range
Repair Kit
Model Numbers
PH183552 Panel Mounted, pushbutton
-20 to 450 o F (-29 to 232 o C) .40 250 psi (17 bar)
PH613612
PH183554 Bracket Mounted, pushbutton PH613612
PH183612 Line Mounted, pushbutton PH613612
PH433553
Bracket Mounted, pilot
operated
PH613612
PH433555 Line Mounted, pilot operated PH613612
PH434150 Panel Mounted, pilot operated PH614150
Proserv’s Pneu Hydro pneumatic control valves are simple and robust. These
smooth acting valves offer bubble-tight sealing and can be line, panel or
bracket mounted to comply with your toughest installation problems.
Features & Benefits
• 316 stainless steel construction
• Broad selection of o-ring materials
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Pneumatic Control Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
5.5 mm (0.22 in) Ø
20 mm
(0.79 in)
3.17 mm
(0.125 in) NPT
PILOT
6.35 mm (0.25 in) NPT N.C. INLET
3.17 mm (0.125 in) NPT N.O. INLET
3.17 mm (0.125 in) NPT COMMON
33.52 mm
(1.32 in)
16 mm (0.63 in)
83 mm (3.27 in)
91.44 mm (3.60 in)
25.4 mm
(1in) Ø
25.4 mm (1 in)
62.9 mm (2.48 in)
12.7 mm (0.50 in)
35.05 mm
(1.38 in)
LENGTH
HEIGHT
Technical Specification
Can be customized to suit material requirements.
Model Numbers Operating Temperature Ranges
Maximum Operating
Pressure Range
Repair Kit
Buna-N
Repair Kit
Viton
Buna-N Viton Buna-N Seals Viton Seals
PH433254 PH433254-V -40 to 250 o F (-40 to 121 o C) -20 to 450 o F (-29 to 232 o C) 10,000 psi (689 bar) PH613254 PH613254-V
Proserv’s Pneu Hydro hydraulic quick-vent valves are designed to be placed
in the line between a control valve and actuator. When control pressure is
applied, the internal poppet closes the quick-vent port and directs the flow
through the outlet to the actuator. Upon release of pressure, the poppet’s
internal check closes and the poppet is lifted off the vent seat. The large
capacity of the outlet/vent passage permits rapid flow from the actuator.
The valve is constructed of corrosion resistant materials in accordance with
NACE MR-01-75.
Features & Benefits
• Smooth, chatter-free performance
• 316 stainless steel construction
• Standard seal materials are Buna-N and Viton
• Seal material selections are available for compatibility with virtually any
fluid chemistry
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Hydraulic Quick-Vent Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
12.7 mm (0.5 in) – 14 NPT
12.7 mm (0.5 in)
14 NPT
INLET
VENT
OUTLET
81.78 mm (3.22 in)
34.79 mm (1.37 in)
45.21 mm (1.78 in)
41.14 mm
(1.62 in)
41.14 mm (1.62 in) DIA
6.35 mm (0.25 in) – 18 NPT
HEIGHT
103.12 mm (4.06 in)
LENGTH
Technical Specification
Can be customized to suit material requirements.
1/4” NPT Female
Dimensions
Model Number
Normal
Filtration
Range
Cv
(Kv)
Filtration
Area
(mm2)
Length
(mm)
Hex
(mm)
PH511F4Q-2 5-10
0.25
(.22)
1.5
(38.10)
2.68
(68.07)
0.75
(19.0)
PH511F4Q-3 10-20
0.5
(.43)
PH511F4Q-6 50-75
0.9
(.78)
Proserv’s Pneu Hydro bar stock component filter uses a minimum number
of parts for economy and reliability. It has a strong, durable element,
with a large surface area that reduces the need for frequent cleaning or
replacement.
A unique assembly retains the filter element solidly, preventing flutter; yet
it is easily removed for cleaning or replacement. It will not contribute to
system pulsation. A variety of filtration ranges are available.
Features & Benefits
• 316 stainless steel body and filter element
• Teflon gasket
• Permit use with a wide variety of corrosive fluids
Operating temperature range
-65 to 450 o F (-54 to 232 o C)
Maximum Operating pressure range
6,000 psi (413.68 bar) maximum psid: 1000 across filter element (psid
increases as filter collects contaminants)
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Inline Filters
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
1/4″ NPT
INLET
1/4″ NPT
OUTLET
2.74
LENGTH
Replacement Element Ordering Information
Elements for 1/4” NPT Assemblies
Model Number Normal Filtration Range Cv (Kv)
PH501F4Q-2 5-10 0.25 (.22)
PH501F4Q-3 10-20 0.5 (.43)
PH501F4Q-6 50-75 0.9 (.78)
Proserv’s Pneu-Hydro bar stock relief valves remain bubble-tight up to
cracking pressure. They reseal at less than 10% drop from cracking pressure
in lower ranges, and less than 5% at higher ranges.
Cracking pressure is reliable, repeatable and easily set by an internal
adjustment, which is tamper-proof once the valve is installed in the system.
An O-ring seals the poppet while a metallic stop bears the spring load. This
simple design provides crisp settings and long life. The standard valve is
constructed of 316 stainless steel for strength and durability in the most
corrosive applications.
Features & Benefits
• 316 stainless steel construction
• Cracking pressure is reliable, repeatable and easily set by internal
adjustment
• O-ring seals poppet while metallic stop bears the spring load
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Inline Relief Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
HEX
LENGTH
Technical Specification
Can be customized to suit material requirements.
Model Numbers -1/4” Female Model Numbers -1/2” Female
Cv
Operating Temperature Ranges
Maximum Operating
Pressure Ranges
Buna Viton Buna Viton Buna-N Seals Viton Seals
PH402F4Q PH402F4Q-V PH402F8Q PH402F8Q-V 0.25
-40 to 250 o F
(-40 to 121 o C)
-20 to 400 o F
(-29 to 204 o C)
3000 – 10,000 psi (6.9 – 10.3 bar)
Standard Repair Kits
Repair Kit Model Numbers For Valve Model Numbers Operating Temperature Ranges
Maximum Operating
Pressure Ranges
Buna Viton Buna Viton Buna Viton
PH613760 PH613760-V
PH402F4Q,
PH402F8Q
PH402F4Q-V,
PH402F8Q-V
-40 to 250 o F
(-40 to 121 o C)
-20 to 400 o F
(-29 to 204 o C)
3000 – 10,000 psi (6.9 – 10.3 bar)
For valve PH224103 (402-G1/4BS) use repair kit 613760-V
For valve PH224105 (402-G3/8BS) use repair kit 613760-V
Proserv’s Pneu-Hydro miniature relief valves provide zero leakage up to
cracking pressure. They reseal bubble-tight within 5 – 10% of cracking pres-
sure. Adjustments are insensitive to temperature variations.
These miniature relief valves are made from 316 stainless steel for strength
and corrosion resistance. Material options can be provided on request. Bu-
na-N or Viton O-rings are standard but other O-ring materials can be provided.
Back-pressure on the 405 and 407 series (with connected vent line) should be
limited to 1,000 psi (69 bar).
Features & Benefits
• Wide series of available pressure ranges
• Smooth, chatter-free performance
• Reliable and repeatable cracking and reseating pressures
• 316 stainless steel construction
• Standard seal materials are Buna-N and Viton
• Seal material selections are available for compatibility with virtually
any fluid chemistry
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Miniature Relief Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Repair Kit Part Numbers are included on page 2 of this spec sheet.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
15.87 mm (0.625 in)
MODELS 404 and 406
INLET
6.35 mm
(0.25 in) NPT
VENT TO
ATMOSPHERE
57.15 mm (2.25 in)
HEX
LENGTH
20.57 mm (0.81 in)
INLET
MODELS 405 and 407
VENT
74.67 mm (2.94 in)
6.35 mm
(0.25 in) NPT
6.35 mm (0.25 in) NPT
HEX
LENGTH
Notes:
Elastomer options are available. Consult factory.
Technical Specification
Can be customized to suit material requirements.
Model Numbers
Vent to Atmosphere
Model Numbers
0.25 NPT Vent Connection
Cv
Operating Temperature Ranges
Operating Pressure Ranges
Buna-N Viton Buna-N Viton Buna-N Seals Viton Seals
PH404M4Q-10 PH404M4Q-10V PH405M4Q-10 PH405M4Q-10V 0.035
-40 to 250 o F
(-40 to 121 o C)
-20 to 450 o F
(-29 to 232 o C)
50 – 100 psi (3 – 6 bar)
PH404M4Q-1 PH404M4Q-1V PH405M4Q-1 PH405M4Q-1V 0.035 100 – 150 psi (6 – 10 bar)
PH404M4Q-2 PH404M4Q-2V PH405M4Q-2 PH405M4Q-2V 0.035 150 – 250 psi (10 – 17 bar)
PH404M4Q-3 PH404M4Q-3V PH405M4Q-3 PH405M4Q-3V 0.035 250 – 350 psi (17 – 24 bar)
PH404M4Q-4 PH404M4Q-4V PH405M4Q-4 PH405M4Q-4V 0.035 350 – 600 psi (24 – 41 bar)
PH404M4Q-5 PH404M4Q-5V PH405M4Q-5 PH405M4Q-5V 0.035
Operating Pressure Ranges
600 – 900 psi (41 – 62 bar)
PH404M4Q-6 PH404M4Q-6V PH405M4Q-6 PH405M4Q-6V 0.035 900 – 1,500 psi (62 – 103 bar) 404 & 405
Series
406 & 407
Series
PH404M4Q-7 PH404M4Q-7V PH405M4Q-7 PH405M4Q-7V 0.035 1,500 – 3,000 psi (103 – 206 bar)
50 – 5,000 psi
(3 – 344 bar)
5,440 – 13,000 psi
(344 – 896 bar)
PH404M4Q-8 PH404M4Q-8V PH405M4Q-8 PH405M4Q-8V 0.035 3,000 – 5,000 psi (206 – 344 bar)
PH406M4Q PH406M4Q-V PH407M4Q PH407M4Q-V 0.035 5,000 – 13,000 psi (344 – 896 bar)
Technical Specification
Standard Repair Kits
Repair Kits for Valves with Buna-N Seals Vent to Atmosphere and 0.25 NPT Vent Connection
Repair Kit Model
Numbers
For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613376-10 PH404M4Q-10, PH405M4Q-10 50 – 100 psi (3 – 6 bar) DF6Purple
PH613376-1 PH404M4Q-1, PH405M4Q-1 100 – 150 psi (6 – 10 bar) Violet
PH613376-2 PH404M4Q-2, PH405M4Q-2 150 – 250 psi (10 – 17 bar) Black
PH613376-3 PH404M4Q-3, PH405M4Q-3 250 – 350 psi (17 – 24 bar) Orange
PH613376-4 PH404M4Q-4, PH405M4Q-4 350 – 600 psi (24 – 41 bar) Yellow
PH613376-5 PH404M4Q-5, PH405M4Q-5 600 – 900 psi (41 – 62 bar) Pink
PH613376-6 PH404M4Q-6, PH405M4Q-6 900 – 1,500 psi (62 – 103 bar) Dk Green
PH613376-7 PH404M4Q-7, PH405M4Q-7 1,500 – 3,000 psi (103 – 206 bar) Dk Blue
PH613376-8 PH404M4Q-8, PH405M4Q-8 3,000 – 5,000 psi (206 – 344 bar) Lt Orange
PH613374 PH406M4Q, PH407M4Q 5,000 – 13,000 psi (344 – 896 bar) Natural
Repair Kits for Valves with Viton Seals Vent to Atmosphere and 0.25 NPT Vent Connection
Repair Kit Model
Numbers
For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613376-10V PH404M4Q-10V, PH405M4Q-10V 50 – 100 psi (3 – 6 bar) DF6Purple
PH613376-1V PH404M4Q-1V, PH405M4Q-1V 100 – 150 psi (6 – 10 bar) Violet
PH613376-2V PH404M4Q-2V, PH405M4Q-2V 150 – 250 psi (10 – 17 bar) Black
PH613376-3V PH404M4Q-3V, PH405M4Q-3V 250 – 350 psi (17 – 24 bar) Orange
PH613376-4V PH404M4Q-4V, PH405M4Q-4V 350 – 600 psi (24 – 41 bar) Yellow
PH613376-5V PH404M4Q-5V, PH405M4Q-5V 600 – 900 psi (41 – 62 bar) Pink
PH613376-6V PH404M4Q-6V, PH405M4Q-6V 900 – 1,500 psi (62 – 103 bar) Dk Green
PH613376-7V PH404M4Q-7V, H405M4Q-7V 1,500 – 3,000 psi (103 – 206 bar) Dk Blue
PH613376-8V PH404M4Q-8V, PH405M4Q-8V 3,000 – 5,000 psi (206 – 344 bar) Lt Orange
PH613374V PH406M4Q-V, PH407M4Q-V 5,000 – 13,000 psi (344 – 896 bar) Natural
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Minature Relief Valves
ingenious simplicity
info@proserv.com
www.proserv.com
ITEM 2
Proserv’s Pneu Hydro pressure indicator offers easy to read evidence of the
presence or absence of pneumatic pressure in a control circuit. When pressure
rises to approximately 1 bar (14 psi), a solid green band shows through the
window. If the pressure drops below 0.5 bar (8 psi), a red and white striped band
appears. The colours are reflective for visibility in lighted surroundings. The
striped section provides added recognition of system status under dimly lit
conditions or for colour blind personnel.
Features & Benefits
• The unit mounts through a 1.75 in. diameter hole and in panels from 17
gauge to 0.18 in. thick.
• The indicator is constructed of 316 stainless steel and satisfies NACE
MRO175 standard.
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Pressure Indicators
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
NPT PORT
2.00
LENGTH
NPT PORT
2.00
2.97
LENGTH
HEIGHT
Technical Specification
Can be customized to suit material requirements.
Model Numbers-1/8” NPT Connection Model Numbers-1/4” NPT Connection Operating Temperature Ranges
Buna-N
Ethylene
Propylene
Viton Buna-N
Ethylene
Propylene
Viton
Buna-N
Seals
Viton Seals
Ethylene
Propylene Seals
PH433774-A PH433774-EPDM PH433774 PH433775-A PH433775-EPDM PH433775
-40 to 250 o F
(-40 to 121 o C)
-20 to 400 o F
(-29 to 204 o C)
-65 to 300 o F
(-53 to 148 o C)
Operating Pressure Ranges Working pressure 250psi – Proof pressure 500psi (17.24 bar – 34.47 bar)
Standard Repair Kit Model Numbers
Buna-N
Ethylene
Propylene
Viton
PH613774-A PH613774-EPDM PH613774
Technical Specification
Can be customized to suit material requirements.
Model Numbers
1/4” Male NPT Inlet x
1/4” Female NPT Outlet
1/4” Male NPT Inlet x
1/4” Male NPT Outlet
Cv
Operating Temperature
Ranges
Operating Pressure Ranges
Buna-N Viton Buna-N Viton Buna-N Seals Viton Seals
PH408M4F4Q-1 PH408M4F4Q-1V PH408M4Q-1 PH408M4Q-1V 0.25
-40 to 250 o F
(-40 to 121 o C)
-20 to 400 o F
(-29 to 204 o C)
100 – 150 psi (6.9 – 10.3 bar)
PH408M4F4Q-2 PH408M4F4Q-2V PH408M4Q-2 PH408M4Q-2V 0.25 150 – 250 psi (10.3 – 17.2 bar)
PH408M4F4Q-3 PH408M4F4Q-3V PH408M4Q-3 PH408M4Q-3V 0.25 250 – 350 psi (17.2 – 24.1 bar)
PH408M4F4Q-4 PH408M4F4Q-4V PH408M4Q-4 PH408M4Q-4V 0.25 350 – 600 psi (24.1 – 41.4 bar)
PH408M4F4Q-5 PH408M4F4Q-5V PH408M4Q-5 PH408M4Q-5V 0.25 600 – 900 psi (41.4 – 62.0 bar)
PH408M4F4Q-6 PH408M4F4Q-6V PH408M4Q-6 PH408M4Q-6V 0.25 900 – 1,500 psi (62.0 – 103.4 bar)
PH408M4F4Q-7 PH408M4F4Q-7V PH408M4Q-7 PH408M4Q-7V 0.25 1,500 – 3,000 psi (103.4 – 206.8 bar)
PH408M4F4Q-8 PH408M4F4Q-8V PH408M4Q-8 PH408M4Q-8V 0.25 3,000 – 5,000 psi (206.8 – 344.7 bar)
PH409M4F4Q PH409M4F4Q-V PH409M4Q PH409M4Q-V 0.09 5,000 – 10,000 psi (344.7 – 689.5 bar)
Proserv’s Pneu-Hydro Right Angle Relief Valves are pressure balanced
internally and pressure referenced to atmosphere. This yields insensitivity
to downstream pressure and permits the valve to be used as a back pressure
regulator. The valve seals against a soft seat and has a metal stop that bears
the spring load, prolongs seal life and prevents sticking.
These valves remain bubble-tight up to cracking pressure and reseal bub-
ble-tight at less than 10% drop from cracking pressure (significantly less in
the higher pressure ranges). The external setting adjustment is particularly
useful in applications where changes are required. The design provides full
flow at a very small rise above cracking pressure.
Features & Benefits
• Wide series of available pressure ranges
• Smooth, chatter-free performance
• Reliable and repeatable cracking and reseating pressures
• 316 stainless steel construction
• Standard seal materials are Buna-N and Viton
• Seal material selections are available for compatibility with virtually any
fluid chemistry
• Valve Weight = .29 lbs
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Right Angle Relief Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Repair Kit Part Numbers are included on page 2 of this spec sheet.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
OUTLET 6.35 mm (0.25 in) NPT
6.35 mm (0.25 in)
NPT
26.16 mm (1.03 in)
39.37 mm (1.55 in)
MAX. 78.23 mm (3.08 in)
INLET
HEIGHT
LENGTH
Technical Specification
Standard Repair Kits
Repair Kits for Valves with Buna-N Seals
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613369-1 PH408M4F4Q-1 100 – 150 psi (6.9 – 10.3 bar) Violet
PH613369-2 PH408M4F4Q-2 150 – 250 psi (10.3 – 17.2 bar) Black
PH613369-3 PH408M4F4Q-3 250 – 350 psi (17.2 – 24.1 bar) Yellow
PH613369-4 PH408M4F4Q-4 350 – 600 psi (24.1 – 41.4 bar) Yellow
PH613369-5 PH408M4F4Q-5 600 – 900 psi (41.4 – 62.0 bar) Dark Green
PH613369-6 PH408M4F4Q-6 900 – 1,500 psi (62.0 – 103.4 bar) Dark Green
PH613369-7 PH408M4F4Q-7 1,500 – 3,000 psi (103.4 – 206.8 bar) Dark Blue
PH613369 PH408M4F4Q-8 3,000 – 5,000 psi (206.8 – 344.7 bar) Red
PH613416 PH409M4F4Q 5,000 – 10,000 psi (344.7 – 689.5 bar) Light Orange
Repair Kits for Valves with Viton Seals
Repair Kit Model Numbers For Valve Model Numbers For Valve Set Pressure Range Spring Color
PH613369-1V PH408M4F4Q-1V 100 – 150 psi (6.9 – 10.3 bar) Violet
PH613369-2V PH408M4F4Q-2V 150 – 250 psi (10.3 – 17.2 bar) Black
PH613369-3V PH408M4F4Q-3V 250 – 350 psi (17.2 – 24.1 bar) Yellow
PH613369-4V PH408M4F4Q-4V 350 – 600 psi (24.1 – 41.4 bar) Yellow
PH613369-5V PH408M4F4Q-5V 600 – 900 psi (41.4 – 62.0 bar) Dark Green
PH613369-6V PH408M4F4Q-6V 900 – 1,500 psi (62.0 – 103.4 bar) Dark Green
PH613369-7V PH408M4F4Q-7V 1,500 – 3,000 psi (103.4 – 206.8 bar) Dark Blue
PH613369-V PH408M4F4Q-8V 3,000 – 5,000 psi (206.8 – 344.7 bar) Red
PH613416-V PH409M4F4Q-V 5,000 – 10,000 psi (344.7 – 689.5 bar) Light Orange
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Right Angle Relief Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Continuous monitoring of the side effects of an abrasive product on flowline and valves is
possible with the use of the Proserv sand probe.
A sensing probe of a predetermined thickness extends through the pipe wall into the flow
path of the abrasive product. When the probe is cut, indicating a known degree of erosions
to lines, valves and fittings, pressure from the flowline enters the sand probe valve body,
shifting the spool valve and vents off a control pressure. This signal may be used to either
close a valve or trigger an alarm.
The device is suitable for use with pneumatic control systems. Select the probe length and
thickness from the probe kit chart on this page.
The sensing pilot is designed with a 1/2 NPT male thread for attachment to the pipe. this
surrounds a 1/4 NPT female connection. With this configuration, probes can be readily
fabricated in the field from standard fittings and tubing.
Features & Benefits
• Wide pressure range: This device may be safely operated in flowlines containing
pressures in the range of 1.72 – 689.47 bar (25 – 10,000 psi)
• Control pressure range: The pilot handles a control system pressure of 1.37 – 17.23
bar (20 – 250 psi)
• Visual indicator: When the probe has been cut and the pilot spool shifts, the palm
button and red band on the main spool indicate that the pilot has been activated
• Manual Control: The palm button on the pilot may be used at any time to cycle the
valve and test the system
• Simplicity: When the probe has been cut by abrasive action of the flowing product, the
pressure in the pipeline shifts the pilot spool
• Choice of probes: Standard wall probes are available in thicknesses of 0.028; 0.035;
0.049 and 0.065 inches. Standard length probes are 6, 10 and 14 inches.
Selection Procedures
The sand probe gives an accurate indication of the erosion on the flowline and its com-
ponents. In the following procedure, the use of probes of different wall thicknesses is
demonstrated:
Pipe: 2 in. schedule 80-normal thickness 0.218 in.
Minimum wall thickness for 1200 psi operation: 0.15 in.
Maximum allowable erosion: 0.068 in. (0.218 in. minus 0.15 in.)
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Sand Probe Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
5.50
OU L T
IN
S NSE
LENGTH
Technical Specification
Basic valve body and repair kit. Product weight 1.5 lb (0.68kg) Can be customized to suit material requirements.
Model
Numbers
Description
Operating
Temperature
Ranges
Maximum Operating
Pressure Ranges
Repair
Kit Model
Numbers
Description
PH434051
30-250psi (2.06 – 17.23 bar)
working pressure, valve assembly
(less probe)
-20 to 450 o F
(-29 to 232 o C)
30-250psi (2.07 – 17 bar) PH614051
For valve assembly 434051 (does
not contain probe)
PH434052
250-10,000psi (17.23 – 689.47
bar) working pressure, valve
assembly (less probe)
250 – 10,000psi
(17 bar – 689 bar)
PH614052
For valve assembly 434052 (does
not contain probe)
PH434062
250-10,000psi (17.23 – 689.47
bar) working pressure, panel mount
valve assembly (less probe)
PH614062
For valve assembly 434062 (does
not contain probe)
For example: one Proserv sand probe assembly for standard and H2S-C02 service, part number 434052.
Parts request (for valve only), one repair kit for Proserv sand probe assemble for standard and HS2-C02 services,
part number 614052.
Technical Specification
Can be customized to suit material requirements.
Model Numbers Operating Temperature Ranges Cv
Maximum Operating
Pressure Range
Buna-N Viton Buna-N Seals Viton Seals .40
PH801F4Q PH801F4Q-V -40 to 250 o F (-40 to 121 o C) -20 to 450 o F (-29 to 232 o C) .40 250 psi (17 bar)
The heart of Proserv’s Pneu Hydro shuttle valve is a stainless steel ball.
The slightest pressure blows this ball from the O-ring seat to the other and
directs flow to the outlet port. The breakaway friction of sliding seal designs
is eliminated by this ‘contact seal’ principle.
Features & Benefits
• 316 stainless steel construction
• Standard seal materials are Buna-N
• Viton or other elastomers are available to meet specific requirements
Production
INGENIOUS SIMPLICITY
PRODUCT SPECIFICATION SHEET
Proserv Pneu-Hydro Shuttle Valves
ingenious simplicity
info@proserv.com
www.proserv.com
Pneu Hydro Valves are manufactured at an ISO 9001 facility.
Pneu Hydro Valves are not European Pressure Directive, ATEX or CE Certified.
0.25 – 18 NPT
INLET B
INLET A
OUTLET
(3 PLACES)
19 mm (0.75 in) HEX
71.5 mm (2.81 in)
11.5 mm (0.45 in)
36.5 mm (1.43 in)
www.proserv.com
info@proserv.com
V2/1114